Schneider Charge Pro 電動車充電站，1xT2S插座，7.4-22kW（單相至三相，16-32A），支援 TIC 通訊與 OCPP 1.6，適合家用及車隊智能高效充電。
兼容所有電動車（EV）及插電式混合動力車（PHEV）
符合最新 IEC 61851 第3版、IEC 62955 與 OCPP 1.6 Json 標準，確保充電穩定高效
堅固耐用：IK10 及 IP55 防護等級，可牆裝或安裝於立柱上
支援乙太網及 Wi-Fi 網路，能連接至監控系統
未來升級無憂：支援 ISO15118 模組升級
 
此 Schneider Charge Pro 為一款牆掛式電動車充電站，符合 IEC 61851-1 標準，亦可安裝於立柱上，適用於室內或戶外使用。其防水防塵等級為 IP55，防撞等級為 IK10，操作溫度範圍為 -30°C 至 50°C。
前方面板設有 T2S 插座。根據供電方式不同，其額定輸出功率如下：
單相供電（230V, 32A, 50Hz）時為 7.4kW
三相供電（380V, 16A/32A, 50Hz）時為 11kW 或 22kW
支援接地系統包括 TN-S、TN-C、TT 和 IT。安裝及設定簡易，適合住宅或車隊使用。機身尺寸為 292mm（寬）x 418mm（高）x 136mm（深），重量為 3kg，外殼顏色為黑色（RAL 9005）。
內建直流漏電偵測保護裝置（RDC-DD），配備 Wi-Fi 模組及兩個乙太網接口。可透過 eSetup App 設定為無需認證、或使用 RFID 感應卡認證的充電模式。白色按鈕可啟動 Wi-Fi Direct 模式，方便連接手機進行設定。
LED 指示燈顏色會變化（紅、綠、藍、白、橙），顯示充電狀態。
此設備可與法國 Linky 智能電表透過 TIC 通訊協定互聯，根據家中其他電器耗電情況與尖峰／離峰時段，實時調整分配給電動車的最大充電功率。
支援 OCPP 1.6 通訊協定，能與監控設備或第三方雲端系統連接。也可透過 Wi-Fi 或 RJ45 網線與家庭網路路由器連線。
 
Charging station, Schneider Charge Pro, 1P-3P, 1xT2S, 7.4-11-22kW, 16-32A, with communication with TIC
Compatible with all EVs and PHEVs
Conforms with latest IEC 61851 ed.3, IEC62955 and OCPP 1.6 Json to ensure reliable and efficient charging
Robust: IK10 and IP55. Mountable on Wall and Pedestal
Connected to supervision system via Ethernet and WiFi interfaces
Future ready: Upgradeable ISO15118 module
 
This Schneider Charge Pro product is a wall-mounted charging station for all electrical vehicles compliant with IEC61851-1 standard. It can also be floor-standing fixed on a pedestal and can be installed indoor as well as outdoor. The IP degree of protection is IP55. The IK degree of protection is IK10. The operating temperature is between -30°C and 50°C. The output type is a T2S socket-outlet, fixed on the front face of the station. The nominal output power is depending on how the product is supplied. It is 7.4kW when fed in single-phase with a rated charging current of 32A under 230V with a 50Hz frequency . It is also 11kW or 22kW when fed in three-phase with a rated charging current of respectively 16A or 32A under 380V with a 50Hz frequency . It can be used with a TN-S, TN-C, TT or IT 230 earthing system. The charging station is easy to install and to commission. It is recommended at home as well as at fleets. The dimensions are (W) 292mm x (H) 418mm x (D) 136mm. Its product weight is 3kg. Its color is black (RAL 9005). It is fitted with a built-in protection against residual direct current (RDC-DD as Residual Direct Current Detecting Device). A Wi-Fi module and 2 Ethernet interface modules are also onboard. It is possible to configure with eSetup to either no access control or a control by badge or RFID authentification card to use the charging station for loading an electrical vehicle. A white push-button allows to activate a Wi-Fi direct connection, which is then use to connect to eSetup mobile App for the configuration. One LED is changing color between red, green, blue, white and orange in order to indicate the loading status directly on the charging station. The charger can communicate with Linky Smart Meter with TIC protocol. This one allows to adjust in real time the maximum power allocated to the charging electric vehicle, according to the consumption of the rest of loads in the house and adapt the load according to Off Peak/Peak hours sent by TIC. The OCPP 1.6 communication protocol can be used to connect to the supervision device/third party cloud. It can also be connected to Internet home router, either through Wi-Fi or RJ45 Ethernet cable.